U Channel Roll Forming Machine for Japan
Descripción
Beenew machinery manufactures and provides different kinds of roll forming machines. Channel roll forming machine is our very mature roll forming machine, including c channel roll forming machine, u channel roll forming machine.
U channel and C channel roll forming machines are specially designed to manufacture high quality U channel and C channel. We customize and manufacture all types and sizes of U channel machines according to customer needs. Our channel roll forming machines, track roll forming machines, steel stud roll forming machines, stud and track roll forming machines, etc. are favored by customers all over the world. Welcome to visit our factory, where you can find all the forming machines you need.
C channel roll forming machine
C channel roll forming machine is used to design and manufacture steel C channel, which can be used as load-bearing components such as beams and columns, as purlins and wall beams in wall supports and roof structures. It is also used for track support structures, highway guardrails or pillars for noise barriers.
C channel is also commonly used in power equipment brackets and frames of large equipment.
Beenew machinery designs and produces various roll forming machines for manufacturing steel C channel. You can contact us if you need a forming machine to produce C channel in various fields.
U channel roll forming machine
U channel roll fomring machine is designed for producing U channel profiles made of galvanized steel coils. U channel can be used in different scenarios according to the strength and thickness of the material. U channel with stronger strength and thicker thickness is suitable for use as support or beam of building structure in the construction field.
Steel U channel can be used in drainage system, material conveying track and slideway, building decoration and protection.
Beenew machinery customizes U channel roll forming machine of different types and uses according to customer needs. If you choose us, you will find the right roll forming machine to help your production. The following u channel roll forming machine is produced by us for Japanese customers:
Material
Galvanized sheet,Tension Grade: Q235MPa
Thickness: 0.8-1.5mm
Decoiler
Manual decoiler, 3T
Coil inner–diameter: 470±30mm
Load capacity= Max. 3Ton
Coil Width= Max. 500mm
Roll forming machine
Feeding table with guide,
Gear/Sprocket driving; Dual Leveling
Driving Motor:15KW
Forming Station:12 GROUPS
Roller Material:Gcr15, chrome coated with heat treatment, HRC58-62°
Shaft Diameter:φ80mm
Shaft Material：45# steel
Forming speed: 20m/min
Machine frame:450 H-beam, Stress-Relieving
Hydraulic stamping&cutting Device
Cutting type:Hydraulic stop cutting
Hydraulic pump power:5.5KW
Hydraulic pressure:12 Mpa
Hydraulic blade&cutter material:Cr12, quenching process 58-62
Electrical system
PLC Control System
Voltage:380V/50Hz/3P
Samples
Valoraciones
No hay valoraciones aún.